What is a composite cross fabric？

Cross cloth wall covering originated from abroad, with seamless cross cloth as the base material and PVC as the surface. It has the characteristics of fire resistance, mildew resistance, and scrub resistance. Common ones are 0.92m\1.37m wide cross cloth wall and 2.8m high seamless cross cloth wall.

Composite Cross Base Fabric Seamless Wall Covering Construction Instructions

1、gluing points

After adjusting the glue according to the proportion, stick it to the wall. Note: Thick glue is applied thinly, and the glue is applied evenly. According to the selected glue, determine the time of wall plastering. Generally, the glue sticks after a few minutes at the beginning, which is the best time for wall plastering.

2、Large surface construction

It is recommended to scrape the wall covering up and down with a short brush for the large surface of the wall covering.

3、gate construction

When cutting the top corners, be careful not to cut to the bottom. White leaks can be avoided with scissors.

4、Sun angle construction

First fix the middle part with a tiger's mouth, then quickly wipe it up and down with a clean towel, and use a scraper to scrape the composite cross base cloth wall covering, so that if the outer corner is not empty, it will be more docile (you can also use a hot air gun to blow the soft wall covering, and then make the outer corner) .

5、outside corner cutting

Note: In general, it is strictly forbidden to cut at the corners of the wall covering. Cutting is only possible in special cases, such as where one side of the corner is connected to the wardrobe or the two walls are made of different types of wall coverings. After the construction is completed, it is recommended to install corner guards to avoid burrs at the corners.

6、Inside corner construction

Find the vertices by hand first, then trim the edges with a scraper.